Need help?Do you have a question about the Isotherm SP and is the answer not in the manual?
Provides an overview of the Isotherm SP sea water cooled refrigeration system and its benefits.
Details the components like the skin fitting, heat exchanger, and quick couplings.
Explains how to use the ball valve and its effect on cooling in different conditions.
Covers cleaning, preventing galvanic corrosion, and inspecting the zinc anode.
Guidance on planning the installation and positioning compressor units and pipe runs.
Instructions for fitting the compressor unit securely using the 'Click-on' bracket.
Details on mounting the skin fitting in the hull and sealing the connection.
Advice on installing the ball valve, hose adaptors, and hose orientation.
Provides an overview of the Isotherm SP sea water cooled refrigeration system and its benefits.
Details the components like the skin fitting, heat exchanger, and quick couplings.
Explains how to use the ball valve and its effect on cooling in different conditions.
Covers cleaning, preventing galvanic corrosion, and inspecting the zinc anode.
Guidance on planning the installation and positioning compressor units and pipe runs.
Instructions for fitting the compressor unit securely using the 'Click-on' bracket.
Details on mounting the skin fitting in the hull and sealing the connection.
Advice on installing the ball valve, hose adaptors, and hose orientation.
General| Power | 750 W |
|---|---|
| Voltage | 230 V |
| Material | AISI 316 Stainless Steel |
| Power Supply | AC |
| Operating Temperature | Adjustable thermostat |
To Next Page