iSP Technologies THETA PRO DSP - THETA PRO DSP SPECIFICATIONS

THETA PRO DSP™ SPECIFICATIONS
INPUT IMPEDANCE
INPUT LEVEL TRIM
MAXIMUM INPUT SIGNAL
NOISE FLOOR
DYNAMIC RANGE
MAX PREAMP GAIN / DIGITAL
THD / CLEAN MODE
DECIMATOR / MAX NOISE RED
COMPRESSION / MAXIMUM
FREQUENCY RESPONSE
HEADPHONE OUTPUT LEVEL
STAGE OUTPUTS / MAX LEVEL
DIRECT XLR OUTPUT S
DIMENSIONS
WEIGHT
DIRECT OUTPUT CONNECTION
POWER
NOTE:0dbu = .775 VRMS
470K OHM
21.5db / input level -8dbu to +13.5dbu
+13.5dbu
- 110dbu A WTD
123db A WTD
125db
.002%
80db
22db
20Hz – 20KHz = +0 / -.5db
MIN -95dbu / MAX 0dbu / +6dbu BOOST ON
+12dbu / +15dbu with BOOST ON
Max Level +20dbu / Global Trim -12db
17” W x 3.4” H x 9” D
6.12 lbs
Balanced XLR
9VAC RMS / 1.5 AMPS
THETA PRO DSP™ is covered under US Patents 6,944,305 and 7,532,730
THETA PRO DSP™ and INTELLIGENT SPEAKER™ are trademarks of ISP
Technologies