How to fix a leak at the inlet/outlet of Ispring UVF55FS Water Filtration Systems?
If you notice a leak at the inlet or outlet of your Ispring Water Filtration System, wrap Teflon tape on the threads and reconnect the water pipe.
How to fix a leak from the quartz sleeve in Ispring Water Filtration Systems?
If your Ispring Water Filtration System is leaking from the quartz sleeve, replace the quartz sleeve.
What to do if the ballast alarm goes off and the lamp doesn't power on in Ispring Water Filtration Systems?
If the ballast alarm is activated, the green indicator light is off, and the lamp doesn't power on in your Ispring Water Filtration System, replace the lamp.
What to do if the lamp turns on, but indicator lights and alarm are abnormal in Ispring UVF55FS Water Filtration Systems?
If the lamp turns on, but the indicator lights and alarm are abnormal for your Ispring Water Filtration System, replace the ballast.
What to do if the lamp doesn't turn on after replacing it in Ispring Water Filtration Systems?
If the lamp of your Ispring Water Filtration System doesn't turn on after replacing it, check the lamp connector wires.
Provides essential preparatory steps and considerations before commencing the installation process.
Step-by-step guide for assembling and connecting the UV water filter system components.
Specifies the recommended water quality parameters for effective and safe operation of the UV filter.
General| Model | UVF55FS |
|---|---|
| UV Light | Yes |
| UV Lamp Power | 55W |
| Operating Temperature | 40-100°F |
| UV Lamp Life | 9000 hours (approximately 1 year) |
| Operating Pressure | 25 - 80 PSI |
| Max Water Temperature | 100°F (38°C) |
| Voltage | 110V |
To Next Page
