Ispring UVF55FS User Manual

Step2–Open the package to check all components inside: Filter Chamber, UV Lamp, Quartz Tube, O-rings, Electronic Ballast,
Clamps, Flow switch. Make sure that the Quartz Tube and UV Lamp are clean before installation (clean it with alcohol or mild
detergent). Wear soft non-abrasive gloves to keep any finger marks away from them.
Step3–Remove both Open and Closed End Nut from filter Chamber.
Step4–Install O-ring onto the open end of Quartz Tube (12mm from the edge).
- 5 -

Ispring UVF55FS Specifications

General

Brand	Ispring
Model	UVF55FS
Category	Water Filtration Systems
Language	English