Ista optosonic u 3 radio net User Manual

L.83.0072 - Release 8.0.1 CH 2013
ista International GmbH - Grugaplatz 2 - 45131 Essen
http://www.ista.com
Device Manual
10/15 2.4-Y optosonic u 3 radio net
Nur für den internen Gebrauch — For internal use only — Uniquement pour utilisation interne
3.3 Final steps
1. Position module on mounting plate (if installing with mounting plate).
2. Clean the contact surface on the ultego III.
3. Pull off the protective foil from the rear of the opto head.
4. Glue opto head onto the ultego III. Here, the rack on the opto head and the tip of the arrow marking
on the ultego III (exception: ultego III eco) must be in one line.
1 2 3 4
01 234 567
2013
11a
M-Bus
M
Y
01 234 567
2013
11a
M-Bus
M
Y
01 234
Y

Ista optosonic u 3 radio net Specifications

General

Brand	Ista
Model	optosonic u 3 radio net
Category	Control Unit
Language	English