To Next PageTo Next Page
Need help?Do you have a question about the iStartek VT202 and is the answer not in the manual?
Lists standard and optional accessories included with the device.
Details the technical specifications of the GPS vehicle tracker.
Explains the meaning of the blue LED for GPS signal status.
Explains the meaning of the green LED for GSM network status.
Explains the meaning of the red LED for power and battery status.
Provides instructions for installing the SIM card into the device.
Offers advice on choosing an optimal location for device installation.
Details the wiring setup, including diagrams and notes for connections.
Explains the wiring for power, ACC ignition, and tele-cutoff functions.
Configures the device to connect to a specific server IP or domain.
Sets the Access Point Name (APN) for GPRS network connection.
Adds designated phone numbers for SOS alerts.
Removes previously added SOS numbers from the device.
Retrieves and displays the current configuration settings of the device.
Adjusts the frequency of GPRS data uploading to the server.
Configures the timing for sensor-triggered alarm events.
Resets all device parameters to their default factory values.
Restarts the device to resolve communication or operational issues.
Describes the procedure for turning the device on and off.
Explains how to check the device's location via SMS or platform.
Details how to activate and manage SOS alarms.
Explains the function and notification for wire cut-off.
Describes automatic and manual settings for vibration alarms.
Details commands to cut off and restore vehicle fuel supply.
Explains how to re-enable fuel supply to the vehicle.
General
