2
iStore - Installation Manual - 270L/R290-v1.4 May 2024
Important Information
• This manual includes all the necessary information regarding the installation and
maintenance of this product. Please take the time to read it through before operating.
• When installing the hot water cylinder, please follow the instructions as documented in
this manual.
• Once the installation is complete, check that all connections are secure and the unit is
full before the power is turned On.
• The Installer is to explain to the end user how to operate and maintain the unit in
accordance to this Installation Manual.
• iStore will not be held responsible for any damages or injuries caused by the incorrect
installation of this hot water system.
• It is important that the installation and operational instructions laid out in this manual
are strictly adhered to.
• A maintenance programme must be carried out as recommended in this manual.
Failure to comply with these recommendations may void the warranty.
• This manual could be subject to change without prior notice, if it is felt that product
improvements are to be carried out.
Note your serial number and model here
ModelSerial
Please note that this manual is subject to change. To ensure you have the latest version,
please visit our website at hps://heatpumps.istore.net.au/downloads/ or scan the QR
code provided here.
Ensure you know your model when referring to the website.
To Next Page
Loading...
