Isuzu 2009 MY N Series - Page 31

0A-28 General Information
Legend
1. Tech2
2. Battery power cable
3. 3 A fuse
4. Clip (black)
5. Clip (red)
• If the power supply is not input, check the 3 A fuse.
7. Turn the ignition "ON", and press the "PWR" key of
the Tech2.
8. Confirm the display of the Tech2.
CAUTION:
Remove/install the PCMCIA card after confirming that
power is not being supplied to the Tech2.
MFW90ASH000401
1
2
4
5
3
HCW46ESH001901
Press (ENTER) To Continue
LGGEN-WE-0871_7th.book 28 ページ ２００９年１０月１日 木曜日 午後３時２６分
mechanikar