Need help?Do you have a question about the Isuzu 4BG1 and is the answer not in the manual?
General| Displacement | 4.329 L |
|---|---|
| Compression Ratio | 17.5:1 |
| Aspiration | Naturally Aspirated |
| Cylinder Arrangement | Inline |
| Number of Cylinders | 4 |
| Fuel System | Direct Injection |
| Fuel Type | Diesel |
| Cooling System | Water-cooled |
| Starting System | Electric starter |
| Lubrication System | Forced lubrication |
| Engine Type | 4-stroke, water-cooled, direct injection diesel |
Technical specifications for the standard engine model.
Engine data certified for EPA emissions standards.
Details and sample of EPA emission control labels.
Information on how to identify the engine model and serial number.
Guidance on obtaining genuine parts and service.
Specific requirements and handling for diesel fuel.
Guidelines for engine oil selection and viscosity.
Information on using and maintaining engine coolant.
Essential checks to perform before starting the engine.
Step-by-step guide for starting the engine.
Procedures for verifying engine status after starting.
Monitoring and addressing abnormalities during operation.
Correct procedure for shutting down the engine.
Specific instructions for breaking in a new engine.
Measures to prevent and address engine over-cooling.
Special operating and care instructions for turbocharged engines.
Procedure for starting an engine after extended storage.
Maintenance procedures for the engine's lubricating system.
Maintenance procedures for the engine's cooling system.
Maintenance procedures for the engine's fuel system.
Maintenance procedures for the engine's air intake system.
Maintenance for the engine's electrical components.
Maintenance for various engine assemblies and other parts.
Procedures for checking and adjusting fuel injection nozzles.
Instructions for adjusting valve clearance.
Procedures for checking and adjusting injection timing.
How to measure cylinder compression pressure.
Service procedures for starter and alternator.
How to check the radiator pressurization valve.
Fuel selection for cold weather operation.
Coolant recommendations for cold temperatures.
Impact of temperature on engine oil viscosity.
Battery care and charging in cold weather.
Procedures for starting the engine in cold conditions.
To Next Page
