To Next Page
P
Peter TayeroSep 10, 2025
Show me how to install Rear oil crankshaft seal for Isuzu engine 4JH1
Show me how to install Rear oil crankshaft seal for Isuzu engine 4JH1
General| Bore x Stroke | 95.4 mm x 104.9 mm |
|---|---|
| Compression Ratio | 18.5:1 |
| Fuel System | Direct injection |
| Cylinder Configuration | Inline-4 |
| Valves per Cylinder | 4 |
| Fuel Type | Diesel |
| Engine Type | Diesel, four-stroke |
| Displacement | 3.0 liters |
| Maximum Torque | 217 lb-ft (294 Nm) @ 1800 rpm |
| Oil Capacity | 6.5 liters (with filter) |
Steps to diagnose when the engine is hard to start.
Diagnosis and repair for insufficient engine power.
Steps to diagnose and resolve engine overheating issues.
Troubleshooting starter motor issues.
Troubleshooting guide for engine cooling system problems.
General procedures for diagnosing engine control system issues.
List of Diagnostic Trouble Codes with symptom and flash codes.
