Isuzu A-4BG1T - Page 126

6-6 LUBRICATING SYSTEM
cl
*z+ REASSEMBLY
V
/
Reassembly Steps
I. Oil filter body
2. Coil spring
3. Spring seat
4. Element gasket
I
A 5. Oil filter element
6. Cover gasket
A 7. Center bolt
A 8. Drain plug
Refer to Page 2-2 of the MAINTENANCE for information on the cartridge type (spin-on type) oil filter.
Element
L
8 8
I 8
8 8
C BB 3
Spring side
1,
Important Operation
5. Oil Filter Element
The protruding. portion of the oil filter element must
be facing the spring.
7. Center Bolt
8. Drain Plug
Install the center bolt and drain plug and tighten
them to the specified torque.
(2)
kg-m (ib.ft)
1 Center Bolt Torque 1
5.3 zt ‘l (38.3 2 7.2) 1
1 Drain Plug Torque
1.8 * 0.2 (13.0 =t 1.4) 1