Isuzu FSS - Page 168

4-34
CONTROLS AND INSTRUMENTS
How to Set a New Change
Interval (Odometer Reading) for
Transmission Oil, Smoother Clutch
Oil (Smoother Equipped Model),
Fuel Filter and Power Steering Fluid
1. On the MID, go to the screen for the
maintenance item for which you want
to adjust.
2. Enter the setting change screen by
pressing and holding the MID select
knob.
3. Pressing and holding the MID select
knob resets the new change interval
(distance).
NOTE
If you want to cancel the setting
procedure, press the MID select
knob momentarily. The display
goes back to the screen that was
displayed just before entering the
setting change screen.
•
4608498sec04CONTROLSANDINSTR4-344-344608498sec04CONTROLSANDINSTR4-344-34 2015/11/0213:58:412015/11/0213:58:41