4-111
CONTROLS AND INSTRUMENTS
ADVICE
Use the "C" (crawler gear) position when you need powerful driving forces such
as when the vehicle is loaded.
Use the 1st gear for normal starting.
•
•
How to Use the Low-high Range
Selector Switch (Single-H Shift
Pattern)
Before shifting up from "4" (4th gear) to "5"
(5th gear) or shifting down from "5" (5th
gear) to "4" (4th gear), you need to operate
the low-high range selector switch.
1. Set the selector switch to the low
range or the high range position.
2. Fully depress the clutch pedal.
3. Place the gearshift lever into the
"N" position. When switching to the
high range is completed, the low
range indicator light goes out. When
the switching to the low range is
completed, the low range indicator
light comes on.
!
NOTE
The low-high range switching starts
taking place only when the gearshift
lever is placed in "N".
•
Low range indicator light
4608498sec04CONTROLSANDINSTR4-1114-1114608498sec04CONTROLSANDINSTR4-1114-111 2015/11/0213:59:492015/11/0213:59:49
To Next Page
