5-43
COMFORT AND CONVENIENCE
Time flashes
Time flashes
Time flashes
Adjusting the Time
Press and hold the AM/FM button "AM/FM/
CLOCK" for 2 seconds or more to enter or
exit the time adjustment mode.
When the time adjustment mode is
switched on, you will hear the "beep", and
the time display will flash.
Setting the Hour
Adjust the hour by pressing the preset
button "4/HOUR" for less than 2 seconds.
Press and hold the preset button "4/HOUR"
for 2 seconds or more to advance the hour
continuously.
Setting the Minutes
Adjust the minutes by pressing the preset
button "5/MIN" for less than 2 seconds.
Press and hold the "5/MIN" button for 2
seconds or more to advance the minutes
continuously.
After setting the minutes, press the AM/FM
button "AM/FM/CLOCK" for less than 2
seconds to set the time (the display stops
flashing). (Alternatively, if you do not press
any buttons for 15 seconds, the display
stops flashing and the time is set to the
currently displayed time.)
Setting the Time
NOTE
If the time adjustment operation is suspended for 15 seconds or more, the time
adjustment mode will be cancelled. Restart the process from the beginning.
The time display will flash when the power supply is disconnected and then
reconnected due to the replacement of the battery or fuses. The flashing stops
when the time is reset.
•
•
4608498sec05COMFORTANDCONVEN5-435-434608498sec05COMFORTANDCONVEN5-435-43 2015/11/0214:11:272015/11/0214:11:27
To Next Page
