Isuzu FVM - Page 446

7-22
SERVICE AND MAINTENANCE
1. Set the lever (3) in the "UP" position.
The warning buzzer will sound at the
same time.
Lowering the Cab
2. Hold the switch (4) pressed until the
cab stops rising.
3. Detach the cab stay bar from the
holder on the cab and secure it in the
cab stay bar holder on the chassis.
Cab stay
bar holder
Cab stay bar
4. Set the lever (3) in the "DOWN"
position. The warning buzzer will
sound at the same time to inform you
that the cab will be lowered.
5. Press the switch (4) and the cab will
be lowered. Continue to press the
switch (4) until the sound of the motor
stops, even if the cab is fully lowered.
3
4
3
4
WARNING
Do not go beneath the cab when it is
tilted.
•
WARNING
Do not go beneath the cab when it is
tilted.
•
4608498sec07SERVICEANDMAINTE7-227-224608498sec07SERVICEANDMAINTE7-227-22 2015/11/049:59:322015/11/049:59:32