6
Unpacking the Unit
Introduction
Carefully remove the unit from the carton and
remove all packing material from the unit. Check
that all the following items are in the box:
• Speaker (x2)
• Remote control
• AC adapter (x2)
If any item is missing, consult your dealer
immediately.
We suggest that you retain the original carton
and packing materials in case it is necessary
to return your unit for service. This is the only
way to protect the unit from damage in transit.
When you dispose of the carton and packing
materials, please do so properly. We care about
our environment.
Remove any descriptive labels or stickers from
the front panel of the unit. Do not remove any
labels or stickers that may be affi xed to the back
panel of the wireless speakers.
Protect your Furniture
This model is equipped with non-skid rubber
feet to prevent the product from moving when
you operate the controls. These feet are made
from non-migrating rubber material specially
formulated to avoid leaving any marks or stains
on your furniture. However certain types of oil
based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber feet
to soften, and leave marks or a rubber residue
on the furniture. To prevent any damage to
your furniture we strongly recommend that you
purchase small self-adhesive felt pads, available
at hardware stores and home improvement
centers everywhere, and apply these pads to the
bottom of the rubber feet before you place the
product on fi ne wooden furniture.
Thank you for purchasing the iSymphony WS2
Wireless Speakers. WS2 speakers allow you to
expand your iSymphony wireless audio system
throughout your home or offi ce. WS2 speakers
are designed to be used with an iSymphony
W-series wireless main unit as an audio source.
To Next Page
Loading...