ITC IPT-55A User Manual

SAVE THIS MANUAL
You will need this manual for safety instructions, operating procedures,
and warranty. Put it and the original sales invoice in a safe, dry place
for future reference.
CONSERVEZ CE GUIDE
Vous aurez besoin de ce guide pour les instructions de sécurité,
les procédures d’utilisation et la garantie. Conservez-le dans un
endroit sûr et sec pour référence future.
PROD. NO. 024852
MOD. NO. IPT-55A
5,500 lb Hydraulic Pallet Truck
Operator’s Manual (p.2)
Transpalette de 5 500 lb
Guide d’utilisation (p.8)
M16-ITC024852

ITC IPT-55A Specifications

General

Brand	ITC
Model	IPT-55A
Category	Lifting Systems
Language	English

Summary

Warranty Information

Warranty Policy

Details the guarantee against defects in materials and workmanship for the pallet truck.

Warranty Procedure

Outlines the process for submitting a warranty claim, requiring authorization and proof of purchase.

Handle Attachment

Attach Handle to Pump Unit

Step-by-step instructions for securely attaching the handle to the pump unit using provided hardware.

Control Lever Adjustment

Adjusting Control Lever Positions

Guidance on calibrating the 3-position control lever (LIFT, DRIVE, LOWER) for proper fork operation.

Maintenance

Check Oil Level

Procedure to check hydraulic oil level every six months, recommending specific oil type.

Remove Air from Hydraulic Oil

Steps to purge air from the hydraulic system by setting lever to LOWER and pumping.

Daily Checks

Importance of daily inspections for wheels, axles, and general condition to prevent issues.

Lubrication Frequency

Recommendations for lubricating bearings and shafts, suggesting monthly for regular use.

Safe Operation Guide

Read Manual and Warnings

Operator must read the manual and all safety warnings before using the pallet truck.

Drive Position for Transport

Always keep the control lever in DRIVE position when moving to depressurize the pump.

Pre-Operation Check

Inspect wheels, rollers, handle, forks, and foot pedal before operation for safety.

Load Handling on Inclines

Do not operate loaded pallet truck on ramps or inclines to prevent accidents.

Load Capacity and Centering

Do not exceed rated capacity and ensure loads are centered on forks for stability.

Load Security

Secure loads on forks properly to prevent shifting or falling during transport.

Prohibited Actions

Do not carry people, place hands/feet under forks, or tip the loaded pallet truck.

Unattended Loads

Never leave a loaded pallet truck unattended to prevent unauthorized use or accidents.

Troubleshooting

Forks Do Not Raise to Full Height

Cause: Not enough hydraulic oil. Solution: Fill to capacity.

Forks Do Not Raise

Causes: Insufficient oil, impurities, or air. Solutions: Fill, change oil, or bleed air.

Forks Do Not Descend

Cause: Adjusting nut/screw position. Solution: Adjust as per item 3.3.

Leaks

Cause: Worn/damaged seals or cracked parts. Solution: Replace seals or parts.

Forks Descend in DRIVE Position

Cause: Impurities or air in oil. Solution: Change oil or bleed air.

Parts List

Component Identification

Diagram and list of all parts for the ITC IPT-55A Pallet Truck with reference numbers.

Part Number Reference

Detailed table of part numbers, descriptions, and required quantities for ordering.