3
FRANÇAIS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
20 DO NOT DRIVE STAPLES too close to the edge of the workpiece. The
workpiece is likely to split, allowing the fasteners to y free or ricochet causing
personal injury.
21 STAY ALERT. Keep hands and body away from the path of any potential red
fastener. Watch what you are doing & use common sense. Don’t operate any
tool when you are tired.
22 GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces: pipes, radiators, ranges, and refrigerator enclosures. Before
driving fasteners into walls, oors, or wherever “live” electrical wires may be
encountered, try to ascertain whether there is a danger of shock.
23 KEEP WORK AREA CLEAR of obstructions.
24 EMPLOYERS must enforce compliance with the safety warnings and all
other instructions in this manual. Keep it available for use by everyone
assigned to use this tool.
SPECIFICATIONS
This tool is our most popular air staple gun. It shoots an 18 gauge staple that is
perfect for installing doors and mouldings, cabinet and furniture making, picture
framing, and sub-oor installations.
Shoots all sizes of industry standard 18 gauge narrow crown staples (90 series
1/4" crown), 10 mm (3/8") to 40 mm (1-1/4") in length
Operating pressure (min. to max.): 60-100 psi / 413 to 690 kPa / 4.13 to 6.9 bar
Air consumption: 4-5 cfm / 113-141 litres per min.@ 80 psi / 551 kPa
Air inlet: 1/4" NPT
Padded hand grip.
Belt loop hook.
Adjustable exhaust deector.
ool weight: 3.4 lb / 1.5 kg
Pkg. weight: 4.0 lb /1.8 kg
OPERATING PROCEDURES
UNPACKING THE TOOL
Check and make sure one of each of the following are all included.
Stapler
S3 hex key
S4 hex key
Small bottle of air tool oil
Operating instructions
To Next Page
Loading...
Need help?
General
