FRONT PANEL INDICATOR LIGHTS
OPERATING THE ITECHDCDC20
USER GUIDE
Solar Charge
When the aux battery is full, the green Full LED will be lit.
The iTECHDCDC20 will now enter maintenance mode and
provide 0.1A-10A charging current. It will not return to the
charging mode until the auxiliary battery is drained down
to 12.6Volts. If you want to force start recharging the aux
battery, simply disconnect and reconnect the aux battery
from the iTECHDCDC20. Please note, the iTECHDCDC20
requires a minimum of 25Watts to maintain solar charge.
Solar Charge
Whencharging is from the solar input of the iTECHDCDC20
the red charging and solar input LEDs will be lit.
To Next Page
Loading...