FRONT PANEL INDICATOR LIGHTS
OPERATING THE ITECHDCDC20
USER GUIDE
DC Charge
Whencharging is from the DC input of the iTECHDCDC20,
the red charging LED will be lit.
DC Charge
When the auxiliary battery is full, the green Full LED will be
lit. The iTECHDCDC20 will now enter maintenance mode
and provide 0.1A-10A charging current. It will not return to
the charging mode until the auxiliary battery is drained
down to 12.6Volts. If you want to force start recharging the
aux battery, simply disconnect and reconnect the aux
battery from the iTECHDCDC20.
To Next Page
Loading...