FRONT PANEL INDICATOR LIGHTS
OPERATING THE ITECHDCDC40
USER GUIDE
DC Charge
Whencharging is from the DC input of the iTECHDCDC40,
the red charging LED will be lit.
DC Charge
When the auxiliary battery is full, the green Full LED will be
lit. The iTECHDCDC40 will now enter maintenance mode
and provide 100mA charging current. It will not return to
the charging mode until the auxiliary battery is drained
down to 13.1Volts. If you want to force start recharging the
aux battery, simply disconnect and reconnect the aux
battery from the iTECHDCDC40.
To Next Page
Loading...
