Itel P32 - Page 30

3.1a Safety:
EN60950-1:2006+A11:2009+A1:2010+A12:2011+
A2:2013
3.1b EMC: Draft ETSI EN 301 489-1 V2.2.0 (2017-03)
Draft ETSI EN 301 489-17 V3.2.0 (2017-03)
Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
EN 55032:2015
EN 55035: 2017
EN61000-3-2:2014
EN61000-3-3:2013
3.2 Radio: ETSI EN 301 511 V12.5.1 (2017-03)
ETSI EN 301 908-1 V11.1.1 (2016-07)
ETSI EN 301 908-2 V11.1.1 (2016-07)
ETSI EN 300 328 V2.1.1 (2016-11)
ETSI EN 303 413 V1.1.1 (2017-06)
Final Draft ETSI EN 303 345 V1.1.7(2017-03)
We hereby declare that [all essential radio test
suites have been carried out and that] the above
named product is conformity to all the essential
requirements of directive 2014/53/EU.
The conformity assessment procedure referred to
in Article 17 and detailed in Annex III of Directive
2014/53/EU has been followed with the
involvement of the following Notied Body:
SIEMIC, INC., 775 Montague Expressways, Milpitas,
CA 95035, USA
And issued the EU-type examination certicate:
The accessories of this equipment which will be
sold and used with the equipment together are
listed at:
Adapter: IMU05
Input: AC100-240V 50/60Hz 200mA
Output: DC 5.0V 1.0A
Li-ion battery : BL-38AI
Voltage: 3.85V
Capacity: 4000mAh/3850mAh(typ/min)
Limited Charge Voltage: 4.4V
The software version of this equipment: V001
Place and date of issue (of this DoC):
Shenzhen/2018-03-28
Lebin,Xie/Manager
(Name / Title)
(Name and signature of person responsible)
29