11
7.2
Calibration
To keep the accuracy of measurements made using your
ST
007,
iTest Pro
© recommends that it is returned
at least once a year to an approved Calibration
Laboratory for recalibration and certification.
iTest Pro
©
can offer you this service.
Please contact our Service Department for details.
Email: support@offenheimer.com
Tel: +49 030-346554207
7.3 Cleaning
The product can be cleaned by a soft and dry fabric.
Please do not use moisture, abrasives materials,
solvents or any detergents which can be conductive.
7.4
Repair & Service
There are no spare parts in the unit. However, our
customer service department will act immediately to
quote and repair any damage or defect that occurs
beyond the warranty period.
7.5 Storage Conditions
To prolong the product's life period, The product should
be kept in dry conditions and far from heat or sunlight.
For the safe keeping of the product, it should be kept
and stored in the related case supplied inside the
packing.
we highly recommend that the product will not be held
in tool box next to other tools where it can be damaged.
To Next Page
Loading...