Installing the Panel ........................................................ [1]
Mounting the Panel ................................................. 1
Running Wire to the Panel...................................... 2
Connecting Devices to the Panel............................. 2
Connecting the Panel to the Phone Line ................. 4
Installing and Replacing Backup
Batteries................................................................... 6
Installing the Battery Door...................................... 6
Plugging In the Panel .............................................. 7
Adjusting the Panel Speaker Volume...................... 7
Programming the Panel................................................. [8]
Using Access and Programming Codes.................. 8
Entering and Exiting Program Mode ...................... 9
Selecting Communication Locking......................... 9
Clearing Memory .................................................. 10
Programming System Devices.............................. 10
Programming Panel Configuration Options.......... 12
Programming from the Magic Key ....................... 12
Reviewing Panel Configuration Options............... 13
Programming Upper Sensors ................................ 13
Programming Feature Numbers ............................ 14
Requesting CS-4000 Programming....................... 14
Installing Wireless Devices.......................................... [15]
Installing Wireless Sensors.................................... 15
Installing X-10 Lamp Modules.............................. 15
Testing the System........................................................ [15]
Testing Sensors...................................................... 15
Testing Phone Communication ............................. 16
Testing Central Station Communication .............. 17
Appendix A: System Planning Worksheets............... [19]
Appendix B: Programming Tables............................. [21]
Appendix C: Command Summary............................. [25]
User Command Summary ..................................... 25
Program Mode Command Summary..................... 26
Appendix D: Troubleshooting..................................... [29]
Interactive Technologies, Inc.
2266 North Second Street
North Saint Paul, MN 55109
612/777-2690
Document Number 46-586 Rev. C
®
INSTALLATION INSTRUCTIONS
This document describes the procedures necessary for an experienced installer to install this panel. Refer to the
Commander 2000 Reference Manual
(86-001-ITI) if you need more detailed information.
R
To Next Page
Need help?
General
