SERVICE MANUAL
B-61
Step 120
Fit Breather assy. on front cover.
Ft metallic breather assy with 2 breather pipes
(For Comp. Housing Engine) with M8*14 Screws.
Step 121
Fit starter motor after placing gasket using M10*30 and spring washer. B10
Step 122
Fit alternator Mtg. Bracket to Crankcase with 10x20 screws
and Spring washer B10.
Step 119
Screw the dipstick in the respective M10 hole of crankcase with Rubber ring
ITL
To Next Page
Loading...