ITL SOLIS 26 User Manual

Details on how to perform routine maintenance on the tractor.

Guidelines and warnings for safe repair operations.

Scheduled intervals and required service for tractor maintenance.

Information on how to identify tractor components and serial numbers.

Technical specifications for the tractor engine, including dimensions and performance.

General guidelines and precautions for engine dismantling and re-assembly.

Step-by-step procedure for dismantling the engine assembly.

Detailed steps for the re-assembly of the engine components.

Chart correlating common engine faults with their possible causes.

Technical specifications for the tractor's lubrication system components.

Common problems in the lubrication system and their solutions.

Diagram illustrating the components and flow of the lubrication system.

Diagram showing the arrangement of cooling system components and coolant flow.

Technical specifications for the tractor's cooling system components.

Common issues in the cooling system and recommended actions.

Details on the removal, installation, and inspection of the thermostat.

Procedures for inspecting the turbo charger while installed on the vehicle.

Sequence for removing and installing the turbo charger unit.

Recommendations for proper turbo charger operation and maintenance.

Guide to diagnosing and resolving turbo charger problems.

Technical data and specifications for the tractor's clutch system.

Step-by-step instructions for assembling the double clutch.

Procedures for inspecting the clutch disc and clutch cover for wear or damage.

Common clutch problems, their causes, and recommended remedies.

Steps for dismantling and assembling canopy and fender assemblies.

Diagram and part identification for the tractor's transmission unit.

Guidelines for using sealants, greases, and specified torques.

Procedures for filling transmission oil and performing related checks.

Procedure for dismantling the 4WD drop box.

Procedure for assembling the final drive unit.

Method for measuring and adjusting taper roller bearing preload.

Procedure for assembling the PTO power take-off.

Diagram and parts list for the hydraulic power lift circuit.

Detailed breakdown of hydraulic control valve components.

Procedure for cleaning the hydraulic control valve.

Operating instructions for the directional control valve.

Key technical specifications and features of the hydraulic lifting device.

Schematic of the hydraulic lifting device's circuit.

Explanation of the power lift control valve's operating phases.

Procedure for adjusting the control valve's sensitivity regulator.

Exploded view and parts list for front axle components.

Steps for dismantling the front axle power steering system.

Steps for assembling the front axle power steering system.

Procedures for inspecting and verifying the front axle's alignment and components.

Guidelines for proper manual usage by end-users, installers, and operators.

Explanation of symbols used in maintenance and repair instructions.

General overview of the machine's mechanical parts and recommendations.

Specifications related to steering angle, toe-in, and gear ratios.

Information on recommended maintenance schedules and oil change procedures.

Reference tables for adhesives, sealants, and tightening torques.

Procedure for dismantling the steering cylinder assembly.

Procedure for assembling the wheel hub assembly.

Procedure for dismantling the trunnions group.

Procedure for assembling the differential support group.

Troubleshooting steps and actions for common axle problems.

Guide to common axle problems, their causes, and repair actions.

Detailed analysis of axle issues and diagnostic procedures.

Schedule detailing operation codes, descriptions, and estimated times.

Schematic diagram of the hydrostatic steering system.

Exploded view and parts list for the OSPJ100 steering unit.

Procedure for dismantling the hydrostatic steering unit.

Instructions for correctly installing the lip seal on the steering unit.

Overview of the main electrical system components: Battery, Starting, Charging, Accessories.

Information on the charging system, including alternator and regulator.

Description and location of dashboard instruments and controls.

Schematic illustrating the tractor's electrical wiring.

Details on recommended lubricants, greases, and their quantities for different systems.

Visual guide indicating greasing points on various tractor components.

Introduction to specialized tools used for various service operations.

List and diagrams of special tools required for transmission service.