C. 6.0 ASSEMBLY PROCESS OF DOUBLE CLUTCH
1. Insert the main clutch disc into the engine.
2. Attach the Clutch with PTO disc assy. To the engine with the help of 12 MB
screws along with the spring washers with Pneumatic gun having socket of
13mm and torque wrench of 29Nm.
3. Check the setting of the fingers, Upper main clutch (35 to 36) and lower P.T.O
(27 to 28) in the pressure plate in this D. C. engine with the help of if Vernier
Caliper/depth Gauge.
SERVICE MANUAL
C-4
ITL
To Next Page
Loading...