11
11
Precautions on Maintenance and Checks
Precautions after the Treatment
1）After using the unit, put the operation switches and dials back in their original
positions in accordance with the prescribed procedure, turn off the power, and
store the unit in an appropriate location.
2）Before unplugging the Electrode Cords from the output ports of the unit, be sure
to first set the output dials back to “0.”
3）Always keep the unit clean.
4）Never clean the unit and accessories using a cloth moistened with thinner,
gasoline, polishing powder, hot water, or chemical agents. Only use a cloth
moistened with lukewarm water or a neutral detergent and sufficiently wrung out.
1）When the unit is not to be used for a prolonged period, remove all the batteries.
2）Do not store the unit in environment as follows.
a) At a place where water may splash.
b) In the undue humidity, temperature, dust, air containing salt or sulfur, or
places exposed to direct sunbeam.
c) At an unstable place with inclination, vibration or shock.
d) In the inflammable environment containing oxygen, nitrous oxide, anesthetic
gas, or inflammable disinfectant mixed with the air.
3）Before using a unit that has been out of use for an extended period, confirm that
it operates normally and safely.
4）Maintain the unit and its accessories daily, in addition to periodic checks, to
preserve the performance of the Main Unit and search for deterioration or wear
and tear in the accessories.
5）Check the accessories regularly and replace any that are irregular, in order to
prevent danger.
To Next Page
Loading...