15
15
Operating Method
Open the battery cover on the rear of the unit, and
load the batteries as indicated by the battery marks.
Note:
The unit is supplied without batteries installed.
Use 4 R14 batteries.
Confirm that all output intensity knobs are set to “0.”
Connect the Exclusive Clips to each Electrode
Cord.
※Connect the same colors to each other
(red to red, black to black).
Insert the Electrode Cord plug securely into
each Output port.
Pinch the needle electrodes (handle) firmly
with the Exclusive Clip.
1
1
2
2
3
Electroacupuncture Mode
Preparations
To Next Page
Loading...