Itouchless AV002A - Maintenance and Cleaning; Emptying the Particle Bin; Cleaning the Filter Mesh

OPERATING MANUAL
INTELLIGENT CLEANER
- 7 -
INTELLIGENT CLEANER
1. Empty the bin
a. Turn off the power switch.
b. Press down the bin clip and pull out the bin as shown in the following
illustrations below:
c. Clear the bin.
d. Press down the clip on the bin to insert the bin back to the unit.
2. Clean the filter mesh
a. Turn the bin upside down
b. Press the bottom slightly, take the filter mesh out as shown in the
following illustration:
c. Clear the dirt on the filter mesh.
d. Fit the filter mesh back to the bin.
Press the clip slightly and put the bin back to the Cleaner.