- 13 -
5.9 Clean the Sensors
Use a cotton swab or a soft, dry cloth
to gently wipe dust off of the sensor.
5.8 Cleaning the Wheels
Use the Cleaning Brush to wipe dust off
of the wheels. Do not use water to
clean the wheels.
5.7 Cleaning the Dust Chamber
1.Turn the cleaner upside down
and press the tabs of the plate
cover in to release the plate
cover.
2. Gently brush dust out of the
chamber using the Cleaning
Brush.
3. Put the plate cover back in
place and push in until the tabs
click and lock in place.
To Next Page
Loading...
