Need help?Do you have a question about the ITW SIMCO ION Aerostat Guardian and is the answer not in the manual?
General| Type | Ionizing Blower |
|---|---|
| Model | Aerostat Guardian |
| Manufacturer | ITW SIMCO |
| Input Voltage | 100-240 VAC |
| Frequency | 50/60 Hz |
| Ion Balance | ±10 V |
| Ozone Generation | < 0.005 ppm |
| Noise Level | 52 dBA (low fan speed) |
| Weight | 6.5 lbs (2.95 kg) |
| Discharge Time | <1.5 s @ 30 cm |
Detailed description of the Aerostat Guardian ionizing air blower.
Key features and capabilities of the Aerostat Guardian.
Instructions for carefully removing and inspecting the equipment after shipment.
Guidance on optimal placement of the unit above the work surface.
Methods and options for securely mounting the Aerostat Guardian.
Information on connecting the unit to a power source.
Details on installing and using the optional air filter.
How to adjust fan speed, heater, task lights, and clean emitters.
Data on discharge times and performance metrics.
Common problems, their causes, and solutions.
Overview of recommended maintenance tasks.
Steps for cleaning the ion emitters using the built-in cleaner.
Instructions for cleaning air grilles and outlets.
Guidance on cleaning the optional air filter element.
Methods for verifying the unit's ion output performance.
Procedures for checking the unit's ion balance.
Information on inherent self-balancing and when to contact support.
Procedure for replacing the task light lamp.
Detailed technical specifications for the Aerostat Guardian.
List of available parts and accessories for the unit.
To Next Page