page 8
Preset Stations: To save a station as one of ten possible preset stations, rst manually select the desired station.
Press the play-pause button briey to enter the Preset mode. Preset stations are shown on the screen with
the preset number in parentheses. For example (1) 87.0 is preset number 1 (of 10) and is set to 87.0MHz. Use the
right arrow or left arrow buttons to select the desired preset number. Then press and hold the play-
pause button for several seconds: the station will mute for 1/2 second to conrm the preset, and Acoustix will
exit Preset mode and display only the newly preset station.
To select an existing Preset station, press the play-pause button briey to enter Preset mode, use the right ar-
row or left arrow buttons to select the desired preset, then press the play-pause button again to conrm.
Auxiliary Operation
With Acoustix powered o, plug in one end of a 1/8-in stereo mini-jack into the Auxiliary-in port under the
access door on the back of Acoustix. Plug the other end into the headphone jack on the device you wish to play
through Acoustix.
Power on Acoustix and press the mode button once or twice as needed until “Aux in” is shown on the main part
of the display. Power on the auxiliary device and follow that device’s procedure to begin playing audio.
While in Auxiliary mode, you can adjust the volume using Acoustix. All other operations (pause, tuning, track
selection, etc.) must be performed from the connected auxiliary device.
Phone Operation
When Acoustix is paired to a smart phone via Bluetooth and turned on, phone calls will ring through Acoustix.
The phone number or name of the caller* will be displayed on the screen. Press the phone button to answer
the call. Press the power button briey to reject the call. To end a call in progress, press the phone button briey
again.
* if the caller is in your address book, and your smartphone is capable and properly set to provide this informa-
tion to Acoustix. Most devices will do this by default: see your device’s documentation for additional information.
Call Waiting
During a call, if you have second call, press the power button briey to end the current call and answer the 3rd party
call.
Or press the phone button briey to hold the current call and answer the 3rd party call.
During the call waiting, you can press the power button briey to switch between the current call and the 3rd party
call.
Distributed by
C&A Marketing, Inc.
2 Bergen Turnpike
Ridgeeld Park, NJ 07660
info@myivation.com
MADE IN CHINA
IVATION is a trademark of
C&A IP Holdings, LLC
©2014 All Rights Reserved
To Previous Page
Loading...
Need help?
General
