Optional Filter
Use if you have hard water and other water conditions. Please read the following
instructions carefully.
1. Take filter out of bag, open the
transparent tube and take the
seal ring out.
3. Find the input screw
shown below.
Note: Clean the filter frequently.
4. Take off the cover on
the input tube.
5. Connect the filter in
picture 2 to the input
tube In picture 4.
6. Attach the input screw in
picture 3 to the other end of
the filter.
7. Connect the Input hose
to the input screw.
2. Place the seal ring into the
cap as shown and reconnect
the tube.
10
To Next Page
Loading...