Ivation IVAOZAP04 - Page 3

• Plate Receiver Slot
• Removable Ceramic Plate
• UV Light
• 120V Grounded Power Cord
• Catalytic Filter
• HEPA Filter
• Activated Carbon Filter
• Fuse
About this Product
• Ivation® HEPA Air Purifier & Ozone Generator produces both O3 (ozone) and negative ions to bind to
particulates and freshen the air.
• The unit includes several replaceable filter components: a HEPA filter, an activated carbon filter and a
photocatalytic filter.
• The generation of negative ions and O3 is separately controlled, allowing the unit to be used as either an
air purifier/ozone generator or as a standard air purifier with no ozone being generated.
• Negative ions can be created around the clock to keep down dust and particulates.
About the 3-in-1 Filter
The Ivation® HEPA Air Purifier & Ozone Generator includes a 3-in-1 filter designed to achieve maximum
air purification in your area of choice. This includes:
• 1 HEPA filter – commonly found in hospitals and high-tech manufacturing plants, HEPA filters
can capture radioactive dust and other harmful particles.
• 1 activated carbon filter – removes contaminants and impurities from the air via a process
known as adsorption.
• 1 photocatalytic filter – works in conjunction with the unit’s UV light to destroy undesirable
microorganisms and eliminate unpleasant odors.
Assembly
• With the rear of the unit open and facing you, slide the
ozone plates into the vertical plate receiver slots on the left
and right of the UV light.
• Arrange the filter components against one another
in the order as illustrated.
• Place the complete filter in the unit and use the included
screws to affix the HEPA filter to the rear of the unit.
Plate Receiver Slot
Catalytic Filter
HEPA Filter
Fuse
Removable Ceramic Plate
UV Light
120V Grounded Power Cord