How to Assemble
6
Turn cap counterclockwise
and remove.
Fill tank with fresh water.
IMPORTANT: Water
temperature must be
between 50° and 122°F.
Connect hose to spray nozzle
by turning joint from left
to right.
Spray Gun Assembly
Connect the Brush/Shower Head to the spray gun.
Insert the Brush/Shower head to the spray gun firmly after aligning the salient points of the
Brush/Shower Head with the holes at the spray gun Switch to left - OFF.
Replace cap and turn
clockwise to secure.
Attach hose to tank by turning
the joint from left to right.
Attach power cord to unit
by inserting it firmly into the
power cord inlet.
To Next Page
Loading...