INSTALLATION GUIDE
If this is the first time that you will use this converter box, or you have restored the unit to
the Factory Default, the screen below will appear on your TV screen. Follow the
instructions on the Installation Guide to select preferences on Language, Country and start
the Channel Search.
(1) [OSD Language] Press RIGHT / LEFT key to select a language.
(2) [Country] Press RIGHT / LEFT key to select your country of residence.
(3) [Search Channel] Before searching, switch the key on the rear panel to choose
modulation (CH3 or CH4). Press RIGHT or OK key to begin the Automatic channel search.
If no channel can be found during the channel search process, please check your
antenna connections making sure that the antenna is in proper working order. After the
scanning process is completed, the receiver will automatically save the scanned channels
and display the first channel from the list.
MENU
MAIN MENU
Most functions are available in main menu. Follow the operation help information on the
bottom of the menu to modify the preference options. A password will be required when
modifying advanced options in the menu. The default password is "000000".
Press the MENU key on the remote control; you can access the Main MENU. There are 7
items for set up. Use the LEFT and RIGHT keys to navigate through the menu. Select the
desired option and press the OK key or the RIGHT key to adjust the settings. Press the
EXIT key to exit the main menu.
To Next Page
Loading...
Need help?
General
