iVUE Rincon - Time;Date Stamp

14
3. VIEW MEDIA shows les contained on the SD
card of the Rincon (SD CARD MEDIA) and les that
have been transferred onto your iOS/Android Device
(SAVED MEDIA)
4. Navigate to SD CARD MEDIA; select les and
transfer them into SAVED MEDIA
5. Navigate to SAVED MEDIA; view, select, or save/
share the les
You can change the time/date settings using a MAC/
Windows. This can also be changed using the iOS/
Android app.
A. With an sd card inserted and powered o, plug
the Rincon into your computer using the supplied
USB cable
B. They will mount as a removable drive; open the
drive; locate and open the “SETTING.TXT” le
C. Locate the DATE_STAMP line, change the num-
ber after the equal sign to “1” to enable time/date
stamp or “0” to disable it
D. Locate the TIME_SET line and change the the
time/date; the format is YYYY.MM.DD HH:MM:SS
(Feb. 28, 2019 4:34PM would display as 2019.02.28
04:34:00)
E. Change the “N” (located in front of the time/date
numbers) to a “Y” for your changes to be saved
F. Save the “SETTING.TXT” le and unplug the
Rincon; the next time you record a video, your new
settings will take eect
5. TIME/DATE STAMP
(MAC/WINDOWS)