iVUE Rincon - Page 16

16
SHARPNESS = 0-2
(0=SHARP, 1=NORMAL, 2=SOFT)
Increase or decrease the sharpness
QUALITY = 0-2
(0=ne, 1=good, 2=normal)
Change the video quality
WHITE_BALANCE = 0
(0=WB_AUTO, 1=WB_DAYLIGHT, 2=WB_CLOUDY,
3=WB_TUNGSTEN, 4=WB_FLUORESCENT)
LIGHT_FREQ = 0-1
(0=50HZ, 1=60HZ)
DATE_STAMP = 0-1
(0=o, 1=on)
See time/date section of this manual
AUDIO_VOLUME = 0-2
(0:Max, 1:Mid, 2:Min, 3:O)
LOW_BATTERY_HINTING = 0-2
(0=1min, 1=3min, 2=5min)
The indicator light will come on to warn you that the
battery is low
AUTO_POWER_OFF = 0-3
(0=o, 1=3min, 2=5min, 3=10min)
This function helps you save battery in standby
mode. When in standby mode, the Rincon will auto
power o according to your setting
TIME_SET = N2016.01.01.00:00:00
(Y=change N=no change)
See time/date section of this manual