Iwata Custom Micron B - General Operation; Fine-Line Spraying Techniques

8
GENERAL OPERATION
Fine-Line Spray
1. Depress the main lever (#13) to start airow.
2. Position the airbrush close to the surface, between 1/16
and 1/2 inch.
3. Pull the main lever back slightly to start paint ow.
• A longer distance to the paint surface produces wider lines.
• A shorter distance to the paint surface produces
narrower lines.
• Increased air pressure increases spray width.
• Decreased air pressure decreases spray width.
• The smallest lines are determined by skill and practice.
CAUTION: The needle and nozzle are very delicate.
Even a slight bend on the needle’s tip adversely
eects the spray pattern.