9
TROUBLESHOOTING PROCEDURES
Symptom Problem Solution
Bubbles in Color Cup or Bottle Loose nozzle cap • Tighten (#2) nger tight
Cracked or damaged nozzle • Replace nozzle (#3)
Double Line Dried paint on needle tip (Tip-Dry) • See Cleaning the Needle
Dirty airbrush • See Cleaning the Airbrush Between Colors
• See Cleaning the Needle
Debris on nozzle tip • Clean nozzle (#3) with toothpick
Bent needle • See Needle (#4) to replace needle
Cracked or damaged nozzle • Replace the nozzle (#3)
*Warning: The most likely time to damage the nozzle (#3) is upon removal from the airbrush.
To Next Page
Loading...