Need help?Do you have a question about the Iwatsu CS-3100 and is the answer not in the manual?
Details the key features of the CS-3000 series instrument, including voltage, current, and model variations.
Identifies and describes the components and controls on the instrument's front panel.
Describes the sequence of operations for performing measurements with the instrument.
Details the environmental and positional requirements for instrument setup and installation.
Covers essential steps before measurement, including connections and powering on.
Details how to use the front panel keys and knobs for setting parameters and navigating menus.
Covers the configuration of the step generator for voltage or current step signals.
Explains how to set the collector supply mode, voltage, and current parameters.
Describes the different measurement modes: REPEAT, SINGLE, and SWEEP.
Details how to adjust horizontal and vertical axis settings for waveform display.
Explains various display settings and options, including cursors and zoom.
Covers system-level configurations like utilities, copy, save/recall, and options.
Provides basic instructions for setting up and performing measurements on common devices.
Details procedures for measuring diode forward characteristics, ON resistance, and reverse breakdown.
Covers measurement of transistor IC-VCE, hFE, IC-VBE, IC-IB, and IB-VCE characteristics.
General| Bandwidth | 100 MHz |
|---|---|
| Number of Channels | 2 |
| Sweep Time | 5 ns/div to 0.5 s/div |
| Trigger Modes | Auto, Normal, Single |
| Display | 6 inch CRT |
To Next Page
