IWILL WO2 - Page 47

47
Chapter 4 BIOS Setup
4.4.3 IDE Primary Master / Primary Slave /
Secondary Master / Secondary Slave
Press “Enter” to enter next page for detail hard drive setting.
4.4.3.1 IDE HDD Auto-Detection
Auto-Detect the HDDs Capacity, and its parameters,
ex: Cylinder, Head and Sector.
4.4.3.2 IDE Primary Master / Primary Slave / Secondary Master
/ Secondary Slave
This field specifies type of drive that corresponds to
the drive installed in your system. If you select User,
please specify the correct number of Cylinders,
Heads, and Sectors.
launaM
gniniamerehttesuoystellaunagnitceleS
foepytehtstceleS.neercssihtnosdleif
.ksiddexif
otuA
)eluaVtluafeD(
ehtrofseulavehtnisllifyllacitamotuaSOIB
.sdleifsrotcesdnasdaeh,srednilyc
enoNdehcattaerasevirDksiDynA
4.4.3.3 Capacity Auto Display your disk drive size
4.4.3.4 Access MODE
This field specifies the IDE translation mode.
LAMRON
gnisserddaSHClanoitidartseificepS
.edom
EGRAL
noitalsnartSHCdednetxeseificepS
edom
ABL.edomnoitalsnartABLseificepS
OTUA
)eluaVtluafeD(
dohtemnoitalsnartseificepsSOIB
.yllacitamotua