IWILL WO2 - Parallel Port Mode; Epp Mode Select; Ecp Mode Use Dma

67
Chapter 4 BIOS Setup
4.7.14Parallel Port Mode
This field configures the operating mode of an onboard
parallel port. Ensure you know the specifications of your
parallel port devices before selecting field.
PPS )eulaVtluafeD( ,PPE+PCE,PCE,PPE
4.7.15EPP Mode Select
When the Parallel Port Mode field is configured as EPP,
ECP+EPP mode, the EPP version needs to be specified.
Please refer to ypur peripheral document before selecting
field.
7.1PPElocotorp7.1PPEesU
9.1PPE
)eulaVtluafeD(
locotorp9.1PPEesU
4.7.16ECP Mode Use DMA
When the Parallel Port Mode field is configured as ECP,
ECP+EPP mode, it needs a DMA channel for data transfer.
This field specifies the DMA channel for ECP parallel port
use.
11lennahcAMDesU
3 )eulaVtluafeD( 1lennahcAMDesU
4.7.17AC PWR Loss Recovery
The field configures the system activity after experiencing a
power failure.
stS-remroF
otroirpsutatsremrofotsnrutermetsyS
.stnevessolCA
ffO
)eulaVtluafeD(
.tnevessolCAretfaffosniamermetsyS