Need help?Do you have a question about the iXBlue Gaps MT9 and is the answer not in the manual?
Explains why Gaps calibration is free and the system is pre-calibrated.
Details the necessity of alignment procedure for Gaps systems despite being calibration-free.
Guides on setting the blanking time for optimal Gaps system performance.
Outlines recommended procedures for hydrophone and transducer preventive and curative maintenance.
Describes Gaps systems' positioning accuracy based on SNR, range, and angle.
Lists the maximum operational range for Gaps M7 and M5 systems.
Explains why Gaps systems are best suited for shallow water operations.
Emphasizes the mandatory measurement of sound velocity profiles for nominal accuracy.
Provides methods to optimize Gaps M7 and M5 system performances.
Offers steps to troubleshoot and resolve issues with positioning accuracy.
Explains the impact of mounting misalignments on Gaps M7/M5 performance.
Covers performance metrics, operational capabilities, and applications of the Gaps M5 system.
States the maximum number of targets Gaps M5 can track.
Confirms Gaps M5 supports data telemetry for INS realignment and AUV control.
Confirms Gaps M5 can perform positioning and communication tasks in parallel.
Provides a workaround for GPS signal unavailability during testing.
Compares Gaps M5 and M7, highlighting M5 as a cost-effective version.
Clarifies that Gaps M5 requires no calibration or spincheck.
Suggests methods to check system accuracy if underwater position is inaccurate.
Compares M5 and M7 performance in shallow waters, noting M7's superiority.
Explains Gaps M5's utility as a DP system reference in shallow water.
General| Category | Marine Equipment |
|---|---|
| Manufacturer | iXBlue |
| Model | Gaps MT9 |
| Heading Accuracy | 0.1° |
| Roll and Pitch Accuracy | 0.01° |
| Update Rate | Up to 10 Hz |
| Interfaces | Ethernet, RS-232, RS-422 |
| Stabilization Time | 5 minutes (typical) |
| Operating Temperature | -5°C to +50°C |
| Certifications | CE |
To Next Page
