IXOFF IBOX V3 User Manual

!
IBOX V3
Starting guide
Version 3
1. Introduction
Thank you to choose IBOX V3 for your access control needs.
This manual contains detailed informations about installation of your IBOX V3.
IBOX V3 is a professional server including an application designed to help you in managing access
control system as well as automations.
The devices that you can use are :
A controller for 2 doors (XM200), and the 8 I/O extension board (up to 4 XM8 per XM200).
Your working environment is based on a web interface that allows you to access to IBOX V3 from
any computer (LAN or WAN) using your Web Browser (IE is NOT compatible).
The application run under Linux system to guarantee a solid stability.
Array of possibilities offered by the access control equipment
Array of possibilities offered by IBOX V3
XM200
XM8
XM216
Users
16.000
-
-
Events
8.000
-
-
Alarm inputs
4
8
16
Alarm outputs
4
8
16
Bus
RS485
RS485
RS485
Users
16.000
Events
Unlimited – Depends on the hard drive size
Operators
Unlimited – Depends on the hard drive size
Exports
CSV Format
Backup
Settable - on local hard drive and distant on your own ftp server
Connectivity
TCP/IP on Ethernet network
Fieldbus
1 x RS485 expandable to 8 (optional, with D8RS distributor
QG IBOX V3.0 - september 2017 Page 1

IXOFF IBOX V3 Specifications

General

Category	IP Access Controllers
Input Voltage	12V DC
Certifications	CE, FCC
Supported Protocols	TCP/IP
Humidity	10% - 90% RH, Non-condensing

Summary

Introduction to IBOX V3

Connecting the IBOX V3

RS485 Connection

Connect the cable from the controllers on the 3-point terminal bus adapter provided.

Ethernet Network Connection

Connect the included Ethernet cable to the FIRST Ethernet connector and your LAN.

Power Supply Connection

Connect the power supply jack cable to run the IBOX V3.

First Boot and Network Configuration

Initial Login and Access

Log in to the management interface using default credentials (admin/admin) via web browser.

Network Settings

Configure network features like IP address, network mask, and gateway via System menu.

IBOX V3 API

Shutting Down the IBOX V3 Safely