Why my Ixon IX2400 Network Router has no reception?
If your Ixon Network Router has no reception or is unable to connect to the network, the APN or SSID configuration might be incorrect, so you should check it. Alternatively, try resetting the device.
What to do if my Ixon IX2400 says PIN invalid?
If your Ixon Network Router displays 'PIN invalid', and you're using firmware 3.22 or higher, double-check the PIN. If you're using firmware 3.21.1 or lower, verify the PIN or PUK requirement.
How to troubleshoot Ixon IX2400 waiting for internet access?
If your Ixon Network Router is waiting for internet access, first check your internet connection. If the connection is ok, verify your LAN settings.
What to do if my Ixon IX2400 Network Router requires PUK?
If your Ixon Network Router requires a PUK, unlock the SIM card using the PUK.
What to do if Ixon IX2400 says SIM card is invalid?
If your Ixon Network Router shows that the SIM card is invalid or missing, check the SIM card installation and validity.
How to improve poor reception on Ixon Network Router?
If your Ixon Network Router is connected but has poor reception, try improving the router's placement to get a better signal.
How to resolve LAN/WAN conflict on Ixon IX2400 Network Router?
To resolve a LAN/WAN conflict (conflicting subnets) on your Ixon Network Router, adjust the network settings to eliminate the conflicting subnets.
What to do if Ixon IX2400 Network Router was previously registered to the IXON Cloud?
If your Ixon Network Router was previously registered to the IXON Cloud, remove it from the IXON Cloud and then register it again.
What to do if my Ixon Network Router was removed from the IXON Cloud?
If your Ixon Network Router has been removed from the IXON Cloud, re-insert the USB flash drive to register it again.
General| Brand | Ixon |
|---|---|
| Model | IX2400 |
| Category | Network Router |
| Language | English |
To Next Page
