32
Pre-set Function
1. Set the clock first. (Consult the instruction of clock setting.)
2. Input the cooking program. Two stages can be set at most. Defrosting should not be set
in preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press"Micro./Grill/Combi." once;
b. Turn knob to choose 80% microwave power till "P80" display;
c. Press "START/+30SEC./CONFIRM" to confirm;
d. Turn knob to adjust the cooking time of 7 minutes;
After the above steps, please do not press " START/+30SEC./CONFIRM ". Then do as
following:
3. Press " CLOCK/PRE-SET ". The hour figures flash;
4. Turn knob to adjust the hour figures, the input time should be within 0--23.
5. Press " CLOCK/PRE-SET ", the minute figures will flash.
6. Turn knob to adjust the minute figures, the input time should be within 0--59.
7. Press " START/+30SEC./CONFIRM " to finish setting. ":" will light, buzzer will ring twice
when the time arrives, then cooking will start automatically.
Note: clock must be set first. Otherwise,pre-set function will not work.
Auto Menu
1. In waiting states, turn knob right to choose the menu from "A-1" to "A-8";
2. Press "START/+30SEC./CONFIRM " to confirm the menu you choose;
3. Turn knob to choose the food weight;
4. Press "START/+30SEC./CONFIRM " to start cooking; 5) After cooking finish, the buzzer
sounds five times.
To Next Page
Loading...