J.P. Instruments FS-450 - User Manual

Pilot’s Guide
Fuel Scan
FS-450
Copyright  2002 J.P. Instruments, Inc.
All Rights Reserved
Printed in the United States of America
J.P.INSTRUMENTS Inc.
Information: P. O. Box 7033
Huntington Beach, CA 92646
Factory: 3185-B Airway Ave.
Costa Mesa, CA 92626
(714) 557-3805 Fax (714) 557-9840
www.jpinstruments.com
Rev G
2/19/2013

J.P. Instruments FS-450 Specifications

General

Brand	J.P. Instruments
Model	FS-450
Category	Avionics Display
Language	English

Summary

Section 1 - Introduction

Fuel Management

Explains the importance of fuel flow measurement and how the FS-450 works.

Section 2 - Displays and Controls

STEP Button

Details the functions and operation of the STEP button.

AUTO Button

Details the functions and operation of the AUTO button.

Section 3 - Modes and Alarms

Alarms

Describes how the FS-450 handles low fuel and low time alarms.

Section 5 - Personalizing

Pilot Programming

K Factor

Explains what the K factor is and how it's determined.

Section 6 - Setting the K factor

Procedure to determine the new K factor

Outlines the steps for calculating and setting a new K factor through flights.

FS-450 Set Up

Fuel Measurement Units, Fuel Capacity, Alarm Limits

Section 8 - Rear Panel Connector Pin Assignments

Section 9 - Technical Support

Technical Support

FS-450 Specifications