USB DISPLAY ADAPTER USER MANUAL
13
The functions of the USB Display Adapter will be activated after the
computer restarted. You might see the extend display shown on the display
device.
You can modify the corresponding position of each extend display via
display settings. Go to “START” → “Control Panel” → “Appearance and
Personalization” → “Adjust screen resolution”
※ Right-click on the desktop and go to “Screen Resolution”
When the ‘Screen Resolution’ window appears, each monitor’s number
can be identified by clicking “Identify.” Drag the monitor to the location
you want.
To Next Page
Loading...
Need help?
General
